eCos on KwikStik (Kinetis)

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

eCos on KwikStik (Kinetis)

Richard Rauch
Hi All,

I want to use eCos on Freescale Kinetis uController.
For that I ordered a Kinetis Kwikstik for evaluation. I got it within a few
days.
Further I was able to build the eCos Library and Tests for the board from
available Repository without any problems.

But now I got stucked in debugging issue. I want to debug with gdb over JTAG
(Segger On-board J-Link ), but I cannot find any debugger startup scripts.

Who knows, where I could find scripts? Firstly, I started with demo version
of IAR, but I could use other toolchains too.
I do not want to write scripts by myself. It is some effort and I do not
want to reinvent the wheel!

Many Thanks,

Richard



_______________________________________________
Richard Rauch
ITR GmbH Informationstechnologie Rauch
web:   http://www.itrgmbh.de
_______________________________________________



--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Reply | Threaded
Open this post in threaded view
|

Re: eCos on KwikStik (Kinetis)

Michael Jones
I assume you run the jlink server and tell your debugger to connect to it. No scripts required if you pass the target type on the jlink server command line

Sent from my iPhone

> On Apr 13, 2014, at 10:00 AM, "Richard Rauch" <[hidden email]> wrote:
>
> Hi All,
>
> I want to use eCos on Freescale Kinetis uController.
> For that I ordered a Kinetis Kwikstik for evaluation. I got it within a few
> days.
> Further I was able to build the eCos Library and Tests for the board from
> available Repository without any problems.
>
> But now I got stucked in debugging issue. I want to debug with gdb over JTAG
> (Segger On-board J-Link ), but I cannot find any debugger startup scripts.
>
> Who knows, where I could find scripts? Firstly, I started with demo version
> of IAR, but I could use other toolchains too.
> I do not want to write scripts by myself. It is some effort and I do not
> want to reinvent the wheel!
>
> Many Thanks,
>
> Richard
>
>
>
> _______________________________________________
> Richard Rauch
> ITR GmbH Informationstechnologie Rauch
> web:       http://cp.mcafee.com/d/2DRPoQcyhJ5AQszCbIfc9CXCQn1PapJ5MsO-rhs76zB5dAQsCOW9ISrTm26IcLZvAnbI6zCWvnKnhvhLOqrXwUsZORQr8EGTd7afaxVZicHs3jq9JATvHCzBMseohd7bbVKVI05asiaF0DO7C_Jmxt2lbdQEnzYSUMbIe9zAiWEzm7QefB3ZzOUa-RqtiHsruoSfY01dIfLECPiSd2go63iWq8f4GQd45o6y02z4yENehkQg6yw2F0Sl3hirppdyeDn1IHV
> _______________________________________________
>
>
>
> --
> Before posting, please read the FAQ: http://cp.mcafee.com/d/avndy0O82hJ5AQszCbIfc9CXCQn1PapJ5MsO-rhs76zB5dAQsCOW9ISrTm26IcLZvAnbI6zCWvnKnhvhLOqrXwUsZORQr8EGTd7afaxVZicHs3jqpJATvHCzBMseohd7bbVKVI07ZGQWBmUSYNIvU03zJls-Rq6_Jmxt2lbdQEnzYSUMbIe9zAiWEzm7QefB3ZzOUa-RqtiHsruoSfY01dIfLECPiSd2go63iWq8f4GQd45o6y02z4yENehkQg6yw2F0Sl3hirppdW-ZY
> and search the list archive: http://cp.mcafee.com/d/avndxMOrhpd78VyX3P2pKVJ5MsOCrhs7cLCQn1NEVhjpd79IKyrdCZRwxH3b_nV5OX1EVKDRXBQnQrYCC-Ue7fsJt6OaaJPhOzOEuvkzaT0QSOrpdTWVEVs73C4jhOO-rKr01_qJeFlKdLcr7-00UGvDSHgKxaBCWkd_qJ2W4GmrFgL7VJNwnosj78BRh6IfEsva7X7BMlZGQWBmUSYNIvU02rovvhdCBIq4wMc6BQQgu9lEq8aMd405695hysyFEwd505i1IG6yASOOrwgzDAkyS
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss