[binutils-gdb] Handle "show remote memory-write-packet-size" when not connected

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

[binutils-gdb] Handle "show remote memory-write-packet-size" when not connected

sergiodj+buildbot-2
*** TEST RESULTS FOR COMMIT cc0be08f80d4348e8f81471c80409710c4d4cd1a ***

Author: Pedro Alves <[hidden email]>
Branch: master
Commit: cc0be08f80d4348e8f81471c80409710c4d4cd1a

Handle "show remote memory-write-packet-size" when not connected

Currently "show remote memory-write-packet-size" says that the packet
size is limited to whatever is stored in the remote_state global, even
if not connected to a target.

When we get to support multiple instances of remote targets, there
won't be a remote_state global anymore, so that must be replaced by
something else.

Since it doesn't make sense to print the limit of the packet size of a
non-existing connection, this patch makes us say that the limit will
be further reduced when we connect.

The text is taken from the command's online help, which says:

 "The actual limit is further reduced dependent on the target."

Note that a value of "0" is special, as per "help set remote
memory-write-packet-size":

 ~~~
 Specify the number of bytes in a packet or 0 (zero) for the
 default packet size.
 ~~~

I've tweaked "show remote memory-write-packet-size" to include
"(default)" in the output in that case, like this:

 (gdb) show remote memory-write-packet-size
 The memory-write-packet-size is 0 (default). The actual limit will be further reduced dependent on the target.

While working on this, I noticed that an explicit "set remote
write-packet-size 0" does not makes GDB go back to the exact same
state as the default state when GDB starts up:

 (gdb) show remote memory-write-packet-size
 The memory-write-packet-size is 0. [...]
                                 ^^

 (gdb) set remote memory-write-packet-size 0
 (gdb) show remote memory-write-packet-size
 The memory-write-packet-size is 16384. [...]
                                 ^^^^^

The "16384" number comes from DEFAULT_MAX_MEMORY_PACKET_SIZE.

This happens because git commit a5c0808e221c ("gdb: remove packet size
limit") at
<https://sourceware.org/ml/gdb-patches/2015-08/msg00743.html>, added
this:

  /* So that the query shows the correct value.  */
  if (size <= 0)
    size = DEFAULT_MAX_MEMORY_PACKET_SIZE;

to set_memory_packet_size, but despite what the comment suggests, that
also has the side-effect of recording DEFAULT_MAX_MEMORY_PACKET_SIZE
in config->size.

Finally, DEFAULT_MAX_MEMORY_PACKET_SIZE only makes sense for "set
remote memory-write-packet-size fixed", so I've renamed it
accordingly, to make it a little bit clearer.

gdb/ChangeLog:
2018-05-22  Pedro Alves  <[hidden email]>

        * remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE): Rename to ...
        (DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED): ... this.
        (get_fixed_memory_packet_size): New.
        (get_memory_packet_size): Use it.
        (set_memory_packet_size): Don't override the config size with
        DEFAULT_MAX_MEMORY_PACKET_SIZE.
        (show_memory_packet_size): Use get_fixed_memory_packet_size.
        Don't refer to get_memory_packet_size if not connected to a remote
        target.  Show "(default)" if configured size is 0.

gdb/testsuite/ChangeLog:
2018-05-22  Pedro Alves  <[hidden email]>

        * gdb.base/remote.exp: Adjust expected output of "show remote
        memory-write-packet-size".  Add tests for "set remote
        memory-write-packet-size 0" and "set remote
        memory-write-packet-size fixed/limit".
Reply | Threaded
Open this post in threaded view
|

Failures on Fedora-s390x-m64, branch master

sergiodj+buildbot-2
Buildslave:
        marist-fedora-s390x

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/8594>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/multiple-successive-infcall.exp: thread=4: testing if call get_value
PASS -> KFAIL: gdb.threads/non-ldr-exit.exp: program exits normally
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-s390x-m64/xfails/master/xfail?id=b916c04>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-s390x-m64/xfails/master/xfail.table?id=b916c04>



Reply | Threaded
Open this post in threaded view
|

Failures on Debian-s390x-m64, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        debian-jessie-s390x-1

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/5398>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Debian-s390x-m64/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-m64/xfails/master/xfail?id=6c960dc>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-m64/xfails/master/xfail.table?id=6c960dc>



Reply | Threaded
Open this post in threaded view
|

Failures on Debian-s390x-native-extended-gdbserver-m64, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        debian-jessie-s390x-1

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/5592>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Debian-s390x-native-extended-gdbserver-m64/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/remote.exp: write-packet default
PASS -> FAIL: gdb.base/remote.exp: set write-packet - small
PASS -> FAIL: gdb.base/remote.exp: set write-packet - very-small
new FAIL: gdb.base/remote.exp: write-packet default again
new FAIL: gdb.base/remote.exp: write-packet default limit again
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-native-extended-gdbserver-m64/xfails/master/xfail?id=203280d>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-native-extended-gdbserver-m64/xfails/master/xfail.table?id=203280d>



Reply | Threaded
Open this post in threaded view
|

Failures on Fedora-x86_64-m64, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        fedora-x86-64-2

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/9831>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-x86_64-m64/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-m64/xfails/master/xfail?id=370beeb>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-m64/xfails/master/xfail.table?id=370beeb>



Reply | Threaded
Open this post in threaded view
|

Failures on Fedora-i686, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        fedora-x86-64-4

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/9812>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-i686/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/multiple-successive-infcall.exp: thread=4: testing if call get_value
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-i686/xfails/master/xfail?id=b24bdf1>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-i686/xfails/master/xfail.table?id=b24bdf1>



Reply | Threaded
Open this post in threaded view
|

*** COMPILATION FAILED *** Failures on Fedora-x86_64-w64-mingw32, branch master *** BREAKAGE ***

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        fedora-x86-64-4

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-x86_64-w64-mingw32/builds/1725>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-x86_64-w64-mingw32/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Failed to compiled GDB.  ***
============================

+++ The full log is too big to be posted here.
+++ These are the last 100 lines of it.

../../binutils-gdb/bfd/archive.c:1476:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_noarchive_construct_extended_name_table':
../../binutils-gdb/bfd/archive.c:1485:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_construct_extended_name_table':
../../binutils-gdb/bfd/archive.c:1685:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_archive_bsd44_construct_extended_name_table':
../../binutils-gdb/bfd/archive.c:1729:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_generic_write_ar_hdr':
../../binutils-gdb/bfd/archive.c:1741:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/bfdio.c: In function '_bfd_real_ftell':
../../binutils-gdb/bfd/bfdio.c:53:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_bsd44_write_ar_hdr':
../../binutils-gdb/bfd/archive.c:1784:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_noarchive_write_ar_hdr':
../../binutils-gdb/bfd/archive.c:1790:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function 'bfd_generic_stat_arch_elt':
../../binutils-gdb/bfd/archive.c:1963:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/bfdio.c: In function '_bfd_real_fseek':
../../binutils-gdb/bfd/bfdio.c:65:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function 'bfd_dont_truncate_arname':
../../binutils-gdb/bfd/archive.c:2000:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/bfdio.c: In function '_bfd_real_fopen':
../../binutils-gdb/bfd/bfdio.c:125:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function 'bfd_bsd_truncate_arname':
../../binutils-gdb/bfd/archive.c:2023:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function 'bfd_gnu_truncate_arname':
../../binutils-gdb/bfd/archive.c:2060:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_noarchive_truncate_arname':
../../binutils-gdb/bfd/archive.c:2067:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_write_archive_contents':
../../binutils-gdb/bfd/archive.c:2226:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_compute_and_write_armap':
../../binutils-gdb/bfd/archive.c:2382:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_bsd_write_armap':
../../binutils-gdb/bfd/archive.c:2538:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_archive_bsd_update_armap_timestamp':
../../binutils-gdb/bfd/archive.c:2593:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_coff_write_armap':
../../binutils-gdb/bfd/archive.c:2746:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
cc1: all warnings being treated as errors
../../binutils-gdb/bfd/archive.c: In function '_bfd_noarchive_write_armap':
../../binutils-gdb/bfd/archive.c:2757:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
../../binutils-gdb/bfd/archive.c: In function '_bfd_archive_close_and_cleanup':
../../binutils-gdb/bfd/archive.c:2815:1: error: visibility attribute not supported in this configuration; ignored [-Werror=attributes]
 }
 ^
cc1: all warnings being treated as errors
make[4]: *** [Makefile:1501: archive.lo] Error 1
make[4]: *** [Makefile:1501: bfdio.lo] Error 1
make[4]: Leaving directory '/home/gdb-buildbot-2/fedora-x86-64-4/fedora-x86-64-mingw32/build/bfd'
make[3]: *** [Makefile:1544: all-recursive] Error 1
make[2]: *** [Makefile:1077: all] Error 2
make[3]: Leaving directory '/home/gdb-buildbot-2/fedora-x86-64-4/fedora-x86-64-mingw32/build/bfd'
make[2]: Leaving directory '/home/gdb-buildbot-2/fedora-x86-64-4/fedora-x86-64-mingw32/build/bfd'
make[1]: *** [Makefile:2696: all-bfd] Error 2
make[1]: Leaving directory '/home/gdb-buildbot-2/fedora-x86-64-4/fedora-x86-64-mingw32/build'
make: *** [Makefile:857: all] Error 2
============================



Reply | Threaded
Open this post in threaded view
|

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        fedora-x86-64-3

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/9817>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m64/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/info-os.exp: continue to breakpoint: Set breakpoint here
PASS -> FAIL: gdb.base/info-os.exp: get shared memory key
PASS -> FAIL: gdb.base/info-os.exp: get shared memory ID
PASS -> FAIL: gdb.base/info-os.exp: get semaphore key
PASS -> FAIL: gdb.base/info-os.exp: get semaphore ID
PASS -> FAIL: gdb.base/info-os.exp: get message queue key
PASS -> FAIL: gdb.base/info-os.exp: get message queue ID
PASS -> FAIL: gdb.base/info-os.exp: get socket port number
PASS -> FAIL: gdb.base/remote.exp: write-packet default
PASS -> FAIL: gdb.base/remote.exp: set write-packet - small
PASS -> FAIL: gdb.base/remote.exp: set write-packet - very-small
new FAIL: gdb.base/remote.exp: write-packet default again
new FAIL: gdb.base/remote.exp: write-packet default limit again
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=main: force-fail=1: run failure detected
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=separate: force-fail=1: run failure detected
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=main: force-fail=1: run failure detected
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-extended-gdbserver-m64/xfails/master/xfail?id=d3d9c05>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-extended-gdbserver-m64/xfails/master/xfail.table?id=d3d9c05>



Reply | Threaded
Open this post in threaded view
|

Failures on Fedora-x86_64-native-gdbserver-m64, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        fedora-x86-64-2

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/9771>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m64/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-gdbserver-m64/xfails/master/xfail?id=a5e321e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-gdbserver-m64/xfails/master/xfail.table?id=a5e321e>



Reply | Threaded
Open this post in threaded view
|

Failures on Fedora-x86_64-cc-with-index, branch master

sergiodj+buildbot-2
In reply to this post by sergiodj+buildbot-2
Buildslave:
        fedora-x86-64-1

Full Build URL:
        <http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/9726>

Commit(s) tested:
        cc0be08f80d4348e8f81471c80409710c4d4cd1a

Author(s) (in the same order as the commits):
        Pedro Alves <[hidden email]>

Subject:
        Handle "show remote memory-write-packet-size" when not connected

Testsuite log (gdb.sum and gdb.log) URL(s):
        <http://gdb-build.sergiodj.net/results/Fedora-x86_64-cc-with-index/cc/cc0be08f80d4348e8f81471c80409710c4d4cd1a/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-cc-with-index/xfails/master/xfail?id=6ab5eec>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

        <https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-cc-with-index/xfails/master/xfail.table?id=6ab5eec>